Power Master Window Switch Lock Left LH Driver Side For Liberty Nitro Journey

Power Master Window Switch Lock Left LH Driver Side For Liberty Nitro Journey
  • Sellerwww.bilibouille.com
  • List PriceUS$38.72piece
  • Sale PriceUS$38.72piece
  • ShippingFree Shipping
  • Ratings4,4 (727)

Product Description

Power Master Window Switch Lock Left LH Driver Side For Liberty Nitro Journey

Specification:
Type: Window Lifter Switch

Material: Plastic + Electrical appliances
Voltage: 12 (V)
Fit as follows: 2009-10 Dodge Journey Front Driver Side Single Auto Down
2007-12 Dodge Nitro Front Driver Side Single Auto Down
2008-12 Jeep Liberty Front Driver Side Single Auto Down

Related Repair Advice:
1.Find the Problem
If the window on only one side is not working, it is most likely that the problem is a nonfunctional switch. Also, there could be a problem
in the window’s motor, or the wiring leading from the switch to the motor could be faulty. In this case, it is important to inspect the entire
apparatus thoroughly to identify the exact problem. There can be many reasons why a power window doesn’t work. The first step is to
identify the cause of the malfunction.

2.Examine the Switch
The switches for the passenger windows are wired to the switches on the driver’s side. If there is a problem in the switches of the
passenger windows, the problem could be with either the switches on the passenger windows or the ones on the driver’s side.

3.Removing the Switch
There are a total of 4 tabs on each of the window switches. To remove the switch, each of these four tabs has to be released. These
tabs are extremely sensitive, and a lot of caution should be exercised while releasing them so that they do not break. Use a flat-tipped
screwdriver and slide it under two of the tabs. With a quick motion, release them.

4.Check If the Switch Works
Use the multimeter to check the contacts of the switches. If the resistance of the switches is high, it may be because dirt has settled on
them. Simply cleaning the contacts can therefore solve your problem. Once you have cleaned the contacts, replace the switch onto the
assembly by reinserting the tabs.

5.Re-examine the Switch
Once you have reinstalled the switch back into the car, check whether it is able to function normally again. Push the switch, and observe
if it can make the windows roll. If the windows are working, it implies that the switch is functioning properly. However, if the same problem
persists, the switch may have to be replaced.

6.Installing a New Switch
Before you install a new switch, check whether the contacts are clean. The contacts should be dirt free and should not have kind of debris
on it. Also make sure that the contacts are not rusted. Once you have inspected the new switch, remove the old switch and insert the new
one in its place. Make sure you fasten the tabs properly. Roll the windows and check once again. If your window is still not working, the
problem could be faulty wiring. This will require further checking and correcting that is perhaps done best by a car mechanic.


Package Included:
1 X Window Switch


Power Master Window Switch Lock Left LH Driver Side For Liberty Nitro Journey
Power Master Window Switch Lock Left LH Driver Side For Liberty Nitro Journey
Power Master Window Switch Lock Left LH Driver Side For Liberty Nitro Journey
Power Master Window Switch Lock Left LH Driver Side For Liberty Nitro Journey
Power Master Window Switch Lock Left LH Driver Side For Liberty Nitro Journey

Similar Products